Anthem Statement D1 Betriebsanleitung PDF herunterladen (Seite 17)

2.2 AUDIO CONNECTIONS

Digital Audio Inputs and Outputs:

Digital audio source components can be connected with a coaxial, optical, balanced, or HDMI cable. These

carry 2-channel PCM, Dolby Digital, and DTS. The HDMI inputs also accept up to eight channels of PCM.

Use the HDMI inputs if your display has HDCP-compliant HDMI or DVI input, otherwise use the coaxial or

optical inputs. The processor also provides one balanced AES/EBU connection, which is used on

professional equipment. Any digital input can be assigned to any number of sources that are set to digital.

To change digital audio connection from factory default, see section 3.6.

Digital Rec-Out can provide a signal to the digital audio input of a Mini Disc recorder, CD recorder etc. from

any source set to Digital (except HDMI) or Anlg-DSP – see sections 3.6 to 3.9.

Analog Audio Inputs:

Analog audio connections are made with RCA or XLR cables. To use ZONE2, ZONE3, or RECORD, connect

digital and

analog audio and video* from the source. ZONE2, ZONE3, and RECORD require analog connection

unless set to copy MAIN (explained in sections 3.6 and 4.3).

6-Ch Analog Input:

The 6-Ch input is for connecting DVD-Audio and multichannel SACD players that do not have HDMI output.

When 6-Ch is selected, the video signal from DVD input is routed to the video outputs by factory default – to

change this, see section 3.6.

HDMI connection with cable and satellite receivers may be problematic especially when output

resolution follows each channel (native or pass-through mode). If there is a problem with HDMI from

cable or satellite use component video connection instead, with coax or optical connection for audio.

As these connections were designed to carry HDTV formats, there is almost never a difference in

picture and sound quality with proper settings. As well, switching between channels is faster.

*Some boxes disable their component video output once HDMI is connected. To use the box in a

secondary zone that uses component video, connect the box to the processor via component, not HDMI.

2. CONNECTIONS continued …

Should you need

audio from the

HDMI output to

your display, it’s

2-channel PCM.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 101 102

Keine Kommentare

Anthem Statement D1 Betriebsanleitung Seite 17